Product overview

XBD series fire pump is Shanghai Beiyang pump company according to the market of the fire booster pump (regulator) the actual needs and special requirements, the development of new product development in strict accordance with the national fire newly issued the GB6245-2006 "fire pump" standard. By the national fire equipment quality supervision and testing center of detection, the performance indicators have reached or exceeded the standard requirements, certification national fire equipment inspection center, and in the fire product information published on the China (www.cccf.com.cn).

Product use

1, XBD-L series pumps can be used to transport the following 80 degrees Celsius does not contain solid particles or physical and chemical properties similar to water and liquid, as well as light corrosive liquid.

2, this series of pumps are mainly used in industrial and civil construction of fixed fire protection system (fire hydrant system, automatic sprinkler system and water spray extinguishing system of water supply etc.).

3, XBD-L series pump performance parameters in order to meet the fire conditions, taking into account the life (production) the requirements of water supply conditions, the product can be used for independent fire water supply system, and can be used for fire fighting and life (production) shared water supply system, but also can be used in construction, municipal engineering, mine drainage and boiler etc..

Performance range

Rated flow 5L/s～200L/s

Rated pressure 0.30MPa～1.5MPa

speed 2900r/min；1450r/min；980r/min

Pump inlet pressure≤0.3MPa

Maximum working pressure of pump≤1.6MPa

Pump inlet and outlet diameter65～350mm

Model significance

Product characteristics

1, the pump is a single-stage single suction centrifugal pump, installed in the form of vertical.

2, according to the conditions of use, installation. And rely on the flow, lift requirements, and in series to increase the required flow, lift.

3, bearing the use of low noise sealed bearings, the factory has been injected into the grease, to ensure continuous operation for more than two years. The utility model has the advantages of high concentricity of the components and excellent dynamic balance of the impeller of the pump, and the utility model has the advantages of no vibration and improved use environment.

4, pump seal mechanical seal, solve the serious leakage of conventional centrifugal pump packing, increase service life and ensure the operation site clean and tidy.

5, can lead to friction when the pump rotation parts are made of abrasion resistance, corrosion resistance and high anti bite material combination to ensure reliable operation, reduce noise, and avoid rust water, spray fire blocking device, greatly prolong the service life and stop after the rust killed phenomenon.

Structure description

1, motor and pump coaxial, smooth running, low noise, small vibration.

2, the use of carbide mechanical seal, long service life, no leakage, to ensure clean environment.

3, the same caliber, the center of the same height, easy installation.

4. The bottom of the pump body is provided with a base and a bolt hole

5, set up the gas discharge valve, completely discharged the pump air, to ensure the normal start of the pump.